Scormbee

How to Turn a PowerPoint into a SCORM Course: What Survives and What Doesn't

8 min read Czytaj po polsku

A lot of training already exists as PowerPoint decks, and turning them into SCORM courses sounds like a file conversion. It's only partly that. The file part is easy. The hard part is that a presentation was designed to support a speaker, and in self-paced e-learning there is no speaker. This article covers both: what technically survives the trip from PPTX to SCORM, and what you need to add so the result teaches.

Why a deck isn't a course yet

A good presentation is deliberately incomplete. The slide says "Three warning signs", and the presenter explains them, tells a story, takes questions and checks the room. Remove the presenter and the learner gets the headline without the explanation.

A quick test: read the deck from start to finish without the speaker notes. Every place where you think "you'd have to hear the talk" needs content added. Every slide that is only an agenda, a "Questions?" or a section divider can go.

Two routes: convert or rebuild

Tools take one of two approaches, and the choice decides almost everything else.

Converter (keeps PowerPoint playback) Importer (rebuilds the content)
Looks like the original Yes, pixel for pixel No, uses the tool's layouts and theme
Animations and transitions Usually kept Lost
Slide audio Usually kept Depends on the tool
Editing after conversion Back in PowerPoint, then convert again Directly in the authoring tool
Phones Fixed 16:9 canvas, scaled down Layouts adapt to the screen
Accessibility As good as the deck's reading order and alt text Real text and headings, easier to fix
Typical tools PowerPoint add-ins such as iSpring Suite Browser authoring tools, Scormbee among them

A converter is the right choice when the deck is already a finished self-paced module, for example recorded narration timed to animations, and you won't edit it often. An importer is the right choice when the deck is raw material that you'll reshape, translate and update.

There is also a third, quicker path: give the deck to an AI course generator as a source file. It reads the text, not the design, and writes a new course structure from it. That works well when the deck is a loose collection of slides that needs reorganizing anyway.

What survives an import, element by element

Here is what happens to each kind of PowerPoint content in Scormbee's PPTX import. Other importers differ in details, but the pattern is similar: content survives, effects don't.

In PowerPoint After import
Slide titles Slide headings; a title placed off the slide still names the slide but isn't shown
Body text and bullet lists Text and list blocks, with bold and italics; deeper list levels are folded into their parent item
Pictures (PNG, JPEG, GIF, WebP, SVG) Image blocks; a slide with nothing but pictures becomes one image or a gallery
Pictures in EMF, WMF or TIFF Skipped, so convert them to PNG first
Small images such as logos and icons Left out on purpose
Tables Table blocks
SmartArt The text of each node, as a list
Charts Only the chart title; paste the chart as a picture if you need it
Speaker notes Author notes on the slide (not shown to learners)
PowerPoint sections Course sections
Footers and slide numbers Left out
Theme accent colour and fonts The course colour, if white text stays readable on it; fonts only if the editor ships them
Embedded audio and video Skipped
Animations and transitions Not imported

Two rows deserve attention. The speaker notes hold most of the presenter's explanation, so the import keeps them next to each slide, where you can move them into on-screen text or narration. And PowerPoint sections become course sections, so organizing the deck into sections before import saves restructuring afterwards.

Two smaller things to check after any import. Fonts: if the deck uses a corporate font the editor doesn't have, the text falls back to a default, so pick the closest available font in the course theme once rather than fixing slides one by one. And reading order: slide titles become real headings, which screen readers rely on, so a slide whose title was a picture or a plain text box needs a heading added by hand.

Prepare the deck before you import it

Twenty minutes in PowerPoint makes the import much cleaner.

  • Use real title placeholders. Open View, Outline. Slides whose titles don't appear there have titles in plain text boxes, which an importer can't tell apart from body text.
  • Group slides into sections (right-click between slides, Add Section). One section per topic.
  • Delete what a self-paced learner doesn't need: agenda, "Questions?", "Thank you", backup slides.
  • Replace text in images. A screenshot of a bulleted list imports as a picture. Retype it so it can be edited and translated.
  • Convert EMF and WMF graphics to PNG. These come from older Office clip art and pasted diagrams.
  • Run Review, Check Accessibility and fix missing alt text and reading order. The alt text travels with the image.
  • Write the missing explanation into the speaker notes, so it imports next to the right slide.

Speaker notes and narration

You have three choices for what the presenter used to say.

  1. Put it on screen. Move the essential sentences from the notes to the slide. This works for short explanations and is the easiest to update and translate.
  2. Turn it into narration. Record the notes as audio, one clip per slide. A minute of narration is roughly 130 to 150 spoken words, so a slide with 400 words of notes means three minutes of listening. Rewrite before you record.
  3. Mix both. Key phrases on screen, explanation in audio. Don't have the narrator read the screen text word for word; people read faster than they listen and end up waiting.

Narration needs a transcript or captions for learners who can't listen. In Scormbee, a narration block takes an audio file you upload, a recording made with your microphone in the browser, or speech generated by the browser's text-to-speech, which is handy for a draft before you record the real voice.

Add the interactivity a deck never had

This is where a converted deck becomes a course. Look for these slide patterns and replace them with practice:

Slide pattern in the deck Interaction in the course
"The process in 5 steps" Ordering: put the steps in sequence
Two columns: do / don't Sorting into two categories
Term and definition pairs Matching, or flip cards for review
A case study told as bullets Branching scenario where the learner makes the decisions
An annotated screenshot Image with hotspots
A statement the presenter debunks True or false, with the explanation as feedback
"Questions?" A short quiz, one question per objective

Aim for at least one activity per topic section, and a final quiz if completion has to mean something. How to write good quiz questions explains how to make the questions test decisions, not memory.

Export, test, and go back to PowerPoint when needed

Export SCORM 1.2 unless your LMS administrator asks for 2004 (how to choose), then test as a learner: complete it, fail the quiz, leave halfway and resume. The SCORM player tool shows what the course reports to the LMS before you upload it anywhere.

Sometimes the trip has to go the other way. Trainers often want slides for a classroom session that matches the e-learning. Scormbee exports a course to a 16:9 .pptx with one slide per course slide, sections preserved, and the author notes plus the answers of interactive blocks in the speaker notes, so the trainer has the quiz answers in front of them.

Doing it in Scormbee

Open the editor, import the .pptx, and you get a new course with one course slide per PowerPoint slide. Then work through the steps above: delete presenter-only slides, move notes into text or narration, replace bullet patterns with interactions, add a quiz, and export. If you'd rather have the deck rewritten into a new structure, use the AI course wizard with the .pptx as a source file; the cost in credits is shown before it starts. The PowerPoint to SCORM page shows the import on a sample deck, and if your source is a document rather than slides, see How to create a SCORM course from a PDF.

Frequently asked questions

Can I keep my PowerPoint animations in a SCORM course?

Only with a converter that reproduces PowerPoint playback, such as a PowerPoint add-in. Importers that rebuild the content, Scormbee's included, drop animations and transitions. If an animation carries meaning, for example revealing steps one by one, rebuild it as a steps block or a click-to-reveal interaction.

Will audio and video embedded in my slides carry over?

It depends on the tool. Scormbee's PowerPoint import skips embedded audio and video, so you add them back as narration or video blocks after the import. Converters usually keep slide audio.

Can I convert Google Slides to SCORM?

Yes, through PowerPoint format. In Google Slides choose File, Download, Microsoft PowerPoint (.pptx), then import that file like any other presentation.

Is a PowerPoint saved as a video a SCORM course?

No. PowerPoint can export an MP4, and some tools wrap a video in a SCORM package, but the LMS then records little more than a launch. There are no questions, no score and no learner choices.

Can I turn a SCORM course back into a PowerPoint?

In Scormbee, yes: the PowerPoint export creates a 16:9 presentation with one slide per course slide, the course sections as PowerPoint sections, and the author notes plus the answers of interactive blocks as speaker notes.

More articles

12 November 2026 · 4 min read

How to Update a Dynamic SCORM Course

Publish a change to a Dynamic SCORM course in three steps: edit it, click Publish update, and every LMS shows the new version at the next launch.

Read →